Gator – Binary Options göstəriciləri

İkili seçim brokerlərinin reytinqi:
  • Binomo
    Binomo

    Ən yaxşı ikili seçim brokeridir!
    Pulsuz təlim və demo hesabı!

Contents

US Binary Options Traders

US Binary Options Traders

TOP BINARY OPTION BROKERS FOR US TRADERS:

NO. BROKER US DEPOSIT BONUS PAYOUT % REVIEW OPEN ACCOUNT
1 BinaryMate $250 20%-100% 91% Review Open Account
2 BinaryCent $10 20%-100% 91% Review Open Account

Why Do Most Forex Brokerages Decline US Clients?

Binary option trading brokerages for US residents has been a popular topic of discussion lately. After the 2008 Farm Bill and the Dodd-Frank Wall Street Reform Act of 2020, many binary brokerages closed their doors to US traders. However, there are still a number of firms offering binary options trading to residents of most countries including the United States. This article was compiled to guide US traders through the process of finding and registering with a binary option brokerage.

The Legality of Binary Options Trading in the USA
The binary option industry was created in the USA and is very popular among US traders. It is legal to trade binary options in the USA. There are currently no state or federal laws to prohibit US citizens from trading binary options. Binary options brokerages based in the US are supervised and regulated by the; U.S. Commodity Future Trading Commission (CFTC) and the U.S. Securities and Exchange Commission (SEC).

Offshore Licensed Brokerages
The majority of binary options brokerages that accept US traders are licensed and located in offshore jurisdictions. Trading with an offshore brokerage is not anymore risky than using a domestic brokerage (usually safer) since they are still required to abide by the laws and regulations of the countries their license(s) and regulation(s) are from. Most offshore binary option brokerages are licensed and regulated in multiple jurisdictions which make it even safer for the trader. The majority of European jurisdictions have stricter requirements for binary option brokerages when compared with the CFTC’s requirements.

There is not much competition among US based binary option brokerages since the CFTC limits the number of licensees. The international binary option arena is quite the opposite. Offshore binary option brokerages aggressively offer; large payout rates, bonuses, signup incentives, quick account opening procedures, fast deposits and even faster withdrawals. 24/5 and 24/7 customer service is not uncommon either.

Recommended Requirements for Binary Option Brokerages Accepting US Traders
First and foremost; a trader needs to find a binary options brokerage with a solid and reliable track record. This will guarantee that traders are paid out on time, every time. Secondly, it is important that the binary options brokerage offers a full spectrum of different and varied types of options to trade. Brokerages with a limited number of options to trade greatly decrease the chances of being a profitable trader with their firm. Lastly, the deposit and withdrawal options are very important ESPECIALLY for a US based trader.

There are a number of requisites that every US binary options trader should look for when choosing a brokerage. It is suggested that traders check with their potential binary option brokerage to confirm the following criteria before opening an account. (ForexGator.com recommends all of the binary option brokerages mentioned on this website and the ones listed on this page accept US traders. Just click on any banner and visit the brokerage’s website. New traders will receive a signup bonus when they are ready to start trading!)

İkili seçim brokerlərinin reytinqi:
  • Binomo
    Binomo

    Ən yaxşı ikili seçim brokeridir!
    Pulsuz təlim və demo hesabı!

US Friendly Banking Options: It is important to choose a binary options brokerage that offers several USD deposit and withdrawal options. It is best to avoid brokerages that offer funding options limited to bank wires. This is normally the most convenient funding method for the brokerage however it is the most costly for the trader; unless, there is an incentive or bonus being offered for funding by wire transfer. Ease of withdrawal is as important if not more important than ease of depositing. Review the different withdrawal methods; the estimated timeframes and costs of withdrawing by each method. Have a plan on how you will withdraw funds from the brokerage. If you plan on withdrawing large sums of money, will a bank wire be the most cost effective? What is your plan if you are only withdrawing smaller amounts? Most likely a credit to your credit or debit card will be the fastest and least expensive.

US Dollar Trading: It is advised to fund and trade in US dollars. Certain binary option brokerages may require you to trade in a different currency. This will cost you when exchanging out of USD to trade and then back into USD when you withdraw. There is no reason to trade outside of the dollar when most brokerages will allow you to trade with it.

Multi-Platform Access: How will you be trading? By using your; desktop, tablet, smartphone or all three? Check with the binary option brokerage to see what trading platforms are available to US traders. If your preferred methods of trading are not offered; choosing a different brokerage will most likely make more sense.

Does The Broker Have a Valid License: Check the brokerages to see where they are licensed. Out of all the European Union member states; Cyprus and the UK are the best and most popular.

Online Trading Software Used: Make sure the trading platform software is user friendly and professional. Unprofessional software will not allow a trader to properly research the markets. The best software allows for traders to utilize; charting tools, flexible expiry times and a large number of options to choose from among many other features.

Assets and Contract Types Offered: The top binary brokerages provide a large number of assets to choose from including; stocks from established American companies and numerous currencies. The most common binary option contracts are high/low options. The top binary option brokerages offer a number of contract choices; touch contracts, 60 second contracts and range option contracts to name a few.

Competitive Payouts and Bonuses: A trader becomes profitable when they predict the movement of an asset during a certain period of time. Most binary option brokerages use a payout rate to calculate the profit. For example, if you trade $100 on an option that promises a payout of 90%, then in the case of success you will receive $190. It is important to always choose a binary option brokerage that offers the largest payout rates.

The Best Binary Options Brokers for USA Traders
Currently the top binary options broker for US traders is Finpari. Finpari has a great reputation and is among the most trusted in the industry. You can easily open an account with them by clicking on the banner below. New traders originating from this page will also receive a very generous bonus. Since we started following and reviewing Finpari’s activities; our traders/contributors have had nothing but positive trading experiences.

Gator – Binary Options göstəriciləri

GitHub is home to over 50 million developers working together to host and review code, manage projects, and build software together.

Clone with HTTPS

Use Git or checkout with SVN using the web URL.

Downloading

Want to be notified of new releases in ARM-software/gator ?

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio

Latest commit

Files

Permalink

Type Name Latest commit message Commit time
Failed to load latest commit information.
annotate Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
daemon Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
notify Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
python Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
setup Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
.gitignore gator: Compilation issue resolved Sep 20, 2020
Acknowledgements.md 6.8: Version 6.8 Nov 30, 2020
Contributing.md Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
Maintainers.md 6.8: Version 6.8 Nov 30, 2020
README-mobilesuite.md Added 7.1 sources Nov 6, 2020
README.md Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020
dco.txt 6.8: Version 6.8 Nov 30, 2020
gator_me.py Gatord 7.2 for Arm DS 2020.0 and Arm Mobile Studio 2020.0 Apr 23, 2020

Gator daemon, driver and related tools

The source code for gatord , gator.py and related tools.

  • daemon , python , notify and setup are provided under GPL-2.0-only. See daemon/COPYING, python/COPYING, notify/COPYING and setup/COPYING respectively.
  • annotate is provided under the BSD-3-Clause license. See annotate/LICENSE.

This project contains code from other projects listed below. The original license text is included in those source files.

  • libsensors source code in daemon/libsensors licensed under LGPL-2.1-or-later
  • mxml source code in daemon/mxml licensed under APACHE-2.0 WITH Mini-XML-exception
  • perf_event.h from Linux userspace kernel headers in daemon/k licensed under GPL-2.0-only WITH Linux-syscall-note

The pre-built gatord shipped with Streamline uses musl. For musl license information see the COPYRIGHT file shipped with Streamline, or https://git.musl-libc.org/cgit/musl/tree/COPYRIGHT

Contributions are accepted under the same license as the associated subproject with developer sign-off as described in Contributing.

Instructions on setting up Arm Streamline on the target.

A target agent (gator) is required to run on the Arm Linux target in order for Arm Streamline to operate. Gator requires Linux kernel version 3.4 or later.

A Linux development environment with cross compiling tools is most likely required, depending on what is already created and provided.

Gator uses the Linux Perf API (perf_event_open) for most of its data collection. Additionally it will use ftrace tracepoints and some other common features such as debugfs/sysfs. Most users will not need to make any changes to their kernel configuration (and in many cases they cannot) as most recent Android devices and Linux distributions correctly configure their kernel with the required options. If you are a system integrator, or compiling your own kernel, the following options are required for correct functioning of Gator.

menuconfig options (depending on the kernel version, the location of these configuration settings within menuconfig may differ)

  • General Setup
    • Timers subsystem
      • [*] High Resolution Timer Support (enables CONFIG_HIGH_RES_TIMERS)
    • Kernel Performance Events And Counters
      • [*] Kernel performance events and counters (enables CONFIG_PERF_EVENTS)
    • [*] Profiling Support (enables CONFIG_PROFILING)
  • Kernel Features
    • [*] Use local timer interrupts (only required for SMP and for version before Linux 3.12, enables CONFIG_LOCAL_TIMERS)
    • [*] Enable hardware performance counter support for perf events (enables CONFIG_HW_PERF_EVENTS)
  • CPU Power Management
    • CPU Frequency scaling
      • [*] CPU Frequency scaling (enables CONFIG_CPU_FREQ)
  • Device Drivers
    • Graphics support
      • Arm GPU Configuration
        • Mali Midgard series support
          • [*] Streamline Debug support (enables CONFIG_MALI_GATOR_SUPPORT needed as part of Mali Midgard support)
  • Kernel hacking
    • [*] Compile the kernel with debug info (optional, enables CONFIG_DEBUG_INFO)
    • [*] Tracers
      • [*] Trace process context switches and events (#)

(#) The “Trace process context switches and events” is not the only option that enables tracing (CONFIG_GENERIC_TRACER or CONFIG_TRACING as well as CONFIG_CONTEXT_SWITCH_TRACER) and may not be visible in menuconfig as an option if other trace configurations are enabled. Other trace configurations being enabled is sufficient to turn on tracing.

The configuration options:

  • CONFIG_MODULES and MODULE_UNLOAD (not needed if the gator driver is built into the kernel)
  • CONFIG_GENERIC_TRACER or CONFIG_TRACING
  • CONFIG_CONTEXT_SWITCH_TRACER
  • CONFIG_PROFILING
  • CONFIG_HIGH_RES_TIMERS
  • CONFIG_LOCAL_TIMERS (for SMP systems and kernel versions before 3.12)
  • CONFIG_PERF_EVENTS and CONFIG_HW_PERF_EVENTS (kernel versions 3.0 and greater)
  • CONFIG_DEBUG_INFO (optional, used for analyzing the kernel)
  • CONFIG_CPU_FREQ (optional, provides frequency setting of the CPU)
  • CONFIG_MALI_GATOR_SUPPORT (needed as part of Mali Midgard support)

These may be verified on a running system using /proc/config.gz (if this file exists) by running zcat /proc/config.gz | grep . For example, confirming that CONFIG_PROFILING is enabled

If a device tree is used it must include the pmu bindings, see Documentation/devicetree/bindings/arm/pmu.txt for details.

Use the pre-built gator daemon

The Streamline Setup Target tool will automatically install a pre-built gator daemon. This gator daemon should work in most cases so building the gator daemon is only required if the pre-built gator daemon doesn’t work.

To improve portablility gatord is statically compiled against musl libc from http://www.musl-libc.org/download.html instead of glibc. The gator daemon will work correctly with either glibc or musl.

Building the gator daemon

Building gatord has the following requirements:

  • C++11 supporting compiler
  • Linux based build system

For Linux targets,

gatord should now be created.

For Android targets (install the Android NDK appropriate for your target (ndk32 for 32-bit targets and ndk64 for 64-bit targets), see developer.android.com)

or execute /path/to/ndk/ndk-build if the ndk is not on your path.

gatord should now be created and located in libs/armeabi.

If you get an error like the following, upgrade to a more recent version of the android ndk

To build gatord for aarch64 edit jni/Application.mk and replace armeabi-v7a with arm64-v8a . To build for ARM11 jni/Application.mk and replace armeabi-v7a with armeabi .

  • Copy gatord into the target’s filesystem.
  • Ensure gatord has execute permissions: chmod +x gatord
  • The daemon must be run with root privileges: sudo su gatord &

This configuration requires Linux 3.4 or later with a correctly configured kernel.

As a non-root user

  • Copy gatord into the target’s filesystem.
  • Ensure gatord has execute permissions: chmod +x gatord
  • Run the daemon: ./gatord &

This configuration provides a reduced set of software only CPU counters such as CPU utilization and process statistics, as well as Mali hardware counters on supported Mali platforms.

Perf PMU support

To check the perf PMUs support by your kernel, run ls /sys/bus/event_source/devices/ If you see something like ARMv7_Cortex_A## this indicates A## support. If you see CCI_400 this indicates CCI-400 support. If you see ccn , it indicates CCN support.

CCN requires a perf driver to work. The necessary perf driver has been merged into Linux 3.17 but can be backported to previous versions (see https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/diff/?id=a33b0daab73a0e08cc04459dd44b0121a8e8f81b and later bugfixes)

Compiling an application or shared library

Recommended compiler settings:

  • -g : Debug information, such as line numbers, needed for best analysis results.
  • -fno-inline : Speed improvement when processing the image files and most accurate analysis results.
  • -fno-omit-frame-pointer : Arm EABI frame pointers allow recording of the call stack with each sample taken when in Arm state (i.e. not -mthumb ).
  • -marm : This option is required for ARMv7 and earlier if your compiler is configured with –with-mode=thumb , otherwise call stack unwinding will not work.

For Android ART, passing –no-strip-symbols to dex2oat will result in function names but not line numbers to be included in the dex files. This can be done by running setprop dalvik.vm.dex2oat-flags –no-strip-symbols on the device and then regenerating the dex files.

Polling /dev, /sys and /proc files

Gator supports reading arbitrary /dev , /sys and /proc files 10 times a second. It will either interpret the file contents as a number or use a POSIX extended regex to extract the number, see events-Filesystem.xml for examples.

Kernels with CONFIG_CPU_PM enabled may produce invalid results on kernel versions prior to 4.6. The problem manifests as counters not showing any data, large spikes and non-sensible values for counters (e.g. Cycle Counter reading as very high). This issue stems from the fact that the kernel PMU driver does not save/restore state when the CPU is powered down/up. This issue is fixed in 4.6 so to resolve the issue either upgrade to a later kernel, or apply the fix to an older kernel. The patch for 4.6 that resolves the issue is found here https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=da4e4f18afe0f3729d68f3785c5802f786d36e34 – this patch has been tested as applying cleanly to 4.4 kernel and it may be possible to back port it to other versions as well. Users of this patch may also need to apply https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cbcc72e037b8a3eb1fad3c1ae22021df21c97a51 as well.

There is a bug in some Linux kernels where an Oops may occur when a core is offlined (user space gator only). The fix was merged into mainline in 3.14-rc5, see http://git.kernel.org/tip/e3703f8cdfcf39c25c4338c3ad8e68891cca3731, and has been backported to older kernels (3.4.83, 3.10.33, 3.12.14 and 3.13.6).

CPU PMU: CPUx reading wrong counter -1 in dmesg. To work around, update to the latest Linux kernel or use kernel space gator.

Scheduler switch resolutions are on exact millisecond boundaries. To work around, update to the latest Linux kernel or use kernel space gator.

There is a bug in some Linux kernels where perf misidentifies the CPU type. To see if you are affected by this, run ls /sys/bus/event_source/devices/ and verify the listed processor type matches what is expected. For example, an A9 should show the following.

To work around the issue try upgrading to a later kernel.

On some versions of Android, annotations may not work unless SELinux is disabled by running # setenforce 0

Some targets do not correctly emit uevents when cores go on/offline. This will cause CPU Activity with user space gator to be either 0% or 100% on a given core and the Heat Map may show a large number of unresolved processes. To work around this issue, use kernel space gator. To test for this run # ./gatord -d | grep uevent When cores go on/offline with user space gator something similar to the following should be emitted

The cores that are on/offline can be checked by running # cat /sys/devices/system/cpu/cpu*/online This issue affects a given target if the on/offline cores shown by the cat command change but no cpu uevent is emitted.

On some older versions of Android, the following issue may occur when starting gatord when using ndk-build

Starting with Android-L only position independent executables (pie) are supported, but some older versions of Android do not support them. To avoid this issue, modify Android.mk and remove the references to pie.

Profiling the kernel (optional)

CONFIG_DEBUG_INFO must be enabled, see “Kernel configuration” section above.

Use vmlinux as the image for debug symbols in Streamline.

Drivers may be profiled using this method by statically linking the driver into the kernel image or adding the driver as an image to Streamline.

7 Binary Options

For starters, the gator oscillator is a repainting oscillator. Many of you might wonder what that exactly means. It simply means that data given under the chart change according to current and future price action. That further implies that making a trading decision based on what the oscillator indicates is fine, whereby back-testing should be avoided, hence it is misleading giving only wrong and incorrect data that should not be used.

Still, back-testing can be used under other circumstances, like for example when using the Alligator indicator which is not repainting, but a trend indicator. The bottom line is that back-testing can be used if the trader is looking to confirm an Alligator side.

How Does the Indicator Blend in with Binary Options Trading?

The indicator fits in perfectly with binary options and can actually give great signals on future price action. When the Gator oscillator shows the same color of its positive and negative part, then, it is time to look for a trend. Traders should follow the movement of the oscillator, i.e. follow the direction of the Alligator. If the Alligator is to the upside, place call options, and if the Alligator is heading downwards, put options should be traded.

The Gator and Alligator oscillator share certain similarities, and for a detailed explanation and thorough overview of the Alligator tool and its purpose in binary options trading, simply go the Alligator educational project that is also featured here on Binary Options Education.

Some of the best-known trading platforms come with the oscillator, so for example, the MetaTrader 4, as the biggest platform, features the oscillator under the Insert button. Once you found the Bill Williams indicators, you will be presented with a popup window that reads Gator Oscillator. When you click on it, you will be presented with the same outlay of variables as with the Alligator Oscillator, e.g. teeth, lips, and jaws with the default period of 13, 8, and 5 for each of the variables (teeth, jaws, lips). With the Gator oscillator the default periods are similar but not the same, as they will read 8, 5, and 3 which will indicate if the projected candles on the chart will be the same color in the end, or will they take on different colors.

The standard colors that are featured are either green or red, depending on whether there is a bullish or bearish price trend. Once the indicator is taken to the chart, you will notice that it moves between positive and negative values, whereby the zero level will be implicitly displayed. The oscillator and the candles on ti can assume different colors, so, for example, a candle can be semi-green and semi-red, or it can take on just one of the colors.

Volatility Aspects

The Gator oscillator as a tool has also the ability to represent the volatility index in a very simple manner. Namely, the market‘s volatility increases with the rising distance of the candles from level zero. This information can be used as an advantage when trading options since it widens the perspective and numerous options can be traded on the basis of the volatility level the market undergoes.

Let us illustrate it with the following example:

If the Gator oscillator levels roam for a longer period near the zero level, it clearly indicates that the ranges appear on the chart, which further means that One Touch options should be traded rather than the most common type High/Low options. If you want to trade High/Low still, the option is not completely excluded, but it requires a different oscillator. Good advice would be tracking down divergence patterns or bullish and bearish reverse trends together with a separate oscillator when the market is oversold or overbought.

If we have the situation that the candles in the Gator oscillator are moving away from the zero level, that means that market volatility is very strong at that point, and it would be a good idea to trade options with longer expiry periods, since it indicates that an impulsive move is on its way, but it could also be a zigzag pattern.

There are traders who use the different colors in one candle as an indicator to trade call or put options, but such a strategy is very speculative, and there is no proof that it actually works.

A safe strategy, after all, is to trade call options when the candles are filled with green and when volatility is high. And, when the candles are completely red, whereby volatility is also high, it is the right timing to trade put options.

Looking for the Ideal Striking Price

To find the ideal striking price, you should examine past movements and identify the distances of the oscillators when the markets are active in order to correct the indicator as to portray two lines at the given levels. These levels represent the guidelines for price actions. Trading put options is recommended when the line above zero is touched but only under the condition that the first candle is red and plotted by the Gator oscillator.

When dealing with the opposite, simply do the opposite. Trade call option when the plotted Gator oscillator candle is completely green and when the oscillator is moving downwards to the lower levels on the chart. Such a movement also indicates that volatility is high.

Start trading now by opening a FREE account on one of our recommended brokers.

İkili seçim brokerlərinin reytinqi:
  • Binomo
    Binomo

    Ən yaxşı ikili seçim brokeridir!
    Pulsuz təlim və demo hesabı!

Pul hara qoyulacaq?
Bir cavab yazın

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: